subroutine gesinfo !$$$ subprogram documentation block ! . . . . ! subprogram: gesinfo get information from model guess files ! prgmmr: treadon org: np23 date: 2006-01-10 ! ! abstract: This subroutine gets date/time, vertical coordinate, and other ! information from model guess file(s) ! ! program history log: ! 2006-01-10 treadon ! 2006-04-14 treadon - remove sigi,sigl; add ntracer,ncloud,ck5 ! 2007-03-16 moorthi - replace gfsatm_head%ak,%bk with %vcoord ! 2007-05-08 kleist - add capability to handle fully generalized coordinate ! 2008-06-04 safford - rm unused use one ! 2009-01-07 todling - add logics to determine begin/end of analysis ! 2009-01-28 todling - remove original GMAO interface ! 2009-10-09 wu - replace nhr_offset with min_offset since it's 1.5 hr for regional ! 2010-03-31 treadon - move jcap_b to gridmod ! 2010-09-09 pagowski - add cmaq ! 2010-12-03 Huang - add use_gfs_nemsio if input files is in NEMSIO format ! make use of nemsio_module to obtain header information including time ! vertical corrdiates, ...etc. ! 2011-08-01 lueken - changed F90 to f90 (no machine logic) ! 2011-10-27 Huang - (1) no gfshead%nvcoord info in NEMS header. Add code to determine the ! value of gfshead%nvcoord from gfsheadv%vcoord. ! (2) no idvm info in NEMS header. The output data type of temp and pres ! is fixed as dry temperature (in kelvin) and pressure (pascal). ! The read/write in ncepnems_io.f90 automatically recognizes this ! setting. Therefore, when use_gfs_nemsio = .true. ! (1) remove idvm(5) and derivation of idpsfc5 and idthrm5 ! (2) remove cpi, NEMSIO input always is dry tempersture (no ! conversion from enthalpy w/ cpi is needed) ! 2017-05-12 Y. Wang and X. Wang - forecast length in minute unit is included in analysis time calculation ! for subhourly DA, POC: xuguang.wang@ou.edu ! 2017-10-10 wu,w - setup for FV3 ! 2019-09-24 martin - add use_gfs_ncio if input files are in netCDF format ! ! input argument list: ! ! comments: ! The difference of time Info between operational GFS IO (gfshead%, sfc_head%), ! analysis time (iadate), and NEMSIO (idate=) ! ! gfshead & sfc_head NEMSIO Header Analysis time (obsmod) ! =================== ============================ ========================== ! %idate(1) Hour idate(1) Year iadate(1) Year ! %idate(2) Month idate(2) Month iadate(2) Month ! %idate(3) Day idate(3) Day iadate(3) Day ! %idate(4) Year idate(4) Hour iadate(4) Hour ! idate(5) Minute iadate(5) Minute ! idate(6) Scaled seconds ! idate(7) Seconds multiplier ! ! The difference of header forecasting hour Info bewteen operational GFS IO ! (gfshead%, sfc_head%) and NEMSIO ! ! gfshead & sfc_head NEMSIO Header ! ========================== ============================ ! %fhour FCST Hour (r_kind) nfhour FCST Hour (i_kind) ! nfminute FCST Mins (i_kind) ! nfsecondn FCST Secs (i_kind) numerator ! nfsecondd FCST Secs (i_kind) denominator ! ! %fhour = float(nfhour) + float(nfminute)/r60 + float(nfsecondn)/float(nfsecondd)/r3600 ! ! attributes: ! language: f90 ! machine: ibm RS/6000 SP ! !$$$ use kinds, only: i_kind,r_kind,r_single use obsmod, only: iadate,ianldate,time_offset,iadatemn use gsi_4dvar, only: ibdate, iedate, iadatebgn, iadateend, iwinbgn,time_4dvar use gsi_4dvar, only: nhr_assimilation,min_offset use mpimod, only: npe,mype use gridmod, only: idvc5,ak5,bk5,ck5,tref5,& regional,nsig,regional_fhr,regional_time,fv3_regional,& wrf_nmm_regional,wrf_mass_regional,twodvar_regional,nems_nmmb_regional,cmaq_regional,& ntracer,ncloud,idvm5, & !EPV nlat,nlon,idlsm, & !EPV ncepgfs_head,ncepgfs_headv,idpsfc5,idthrm5,idsl5,cp5,jcap_b, use_gfs_nemsio, & regional_fmin, use_gfs_ncio !EPV use gridmod, only: center_name !EPV use sigio_module, only: sigio_head,sigio_srhead,sigio_sclose,& sigio_sropen use nemsio_module, only: nemsio_init,nemsio_open,nemsio_close use nemsio_module, only: nemsio_gfile,nemsio_getfilehead,nemsio_getheadvar use module_ncio, only: Dimension, Dataset, open_dataset, get_dim, & read_vardata, get_idate_from_time_units,& read_attribute, close_dataset use constants, only: zero,h300,r60,r3600,i_missing use gsi_rfv3io_mod, only: read_fv3_files use read_wrf_mass_files_mod, only: read_wrf_mass_files_class use read_wrf_nmm_files_mod, only: read_wrf_nmm_files_class use gsi_io, only: verbose !EPV use m_chars, only : uppercase !EPV implicit none ! Declare passed variables ! Declare local parameters integer(i_kind),parameter:: lunges=11 real(r_kind),parameter:: zero_001=0.001_r_kind type(read_wrf_nmm_files_class):: wrf_nmm_files type(read_wrf_mass_files_class):: wrf_mass_files ! Declare local variables logical fexist character(6) filename,sfilename character(8) filetype, mdlname integer(i_kind) iyr,ihourg,k,kr integer(i_kind) mype_out,iret,iret2,intype integer(i_kind),dimension(5):: idate4 integer(i_kind),dimension(8):: ida,jda integer(i_kind) :: nmin_an integer(i_kind),dimension(7):: idate integer(i_kind),dimension(6):: idate2 integer(i_kind) :: nfhour, nfminute, nfsecondn, nfsecondd integer(i_kind),allocatable,dimension(:) :: ntrac,ncld real(r_kind) hourg, minuteg real(r_kind),dimension(5) :: fha real(r_single),allocatable,dimension(:,:,:) :: nems_vcoord real(r_single),allocatable,dimension(:) :: aknc, bknc, fhour type(sigio_head):: sighead type(ncepgfs_head):: gfshead type(ncepgfs_headv):: gfsheadv type(nemsio_gfile) :: gfile2 type(Dataset) :: atmges,sfcges type(Dimension) :: ncdim logical :: print_verbose logical :: fatal = .false. character(len=10) :: center character(len=64), parameter :: myname_= 'GESINFO' !--------------------------------------------------------------------- ! Get guess date and vertical coordinate structure from atmospheric ! guess file mype_out=npe/2 !EPV center = UpperCase(trim(center_name)) select case (trim(center)) case ('CPTEC') write(6,*)' GESINFO: chama gesinfo_cptec nhr_assimilation, hourg, idate4 ',nhr_assimilation, hourg, idate4 call gesinfo_cptec(nhr_assimilation, hourg, idate4) case default !EPV print_verbose=.false. if(verbose)print_verbose=.true. ! Handle non-GMAO interface (ie, NCEP interface) if(.not. fv3_regional) then write(filename,'("sigf",i2.2)')nhr_assimilation inquire(file=filename,exist=fexist) if(.not.fexist) then write(6,*)' GESINFO: ***FATAL ERROR*** ',trim(filename),' NOT AVAILABLE: PROGRAM STOPS' call stop2(99) stop end if end if ! Handle NCEP regional case if(regional) then idate4(1)=regional_time(4) ! hour idate4(2)=regional_time(2) ! month idate4(3)=regional_time(3) ! day idate4(4)=regional_time(1) ! year idate4(5)=regional_time(5) ! minutes hourg=regional_fhr ! fcst hour minuteg=regional_fmin ! fcst minute ! Handle RURTMA date: get iadatemn iadatemn(1)=regional_time(1) ! year iadatemn(2)=regional_time(2) ! month iadatemn(3)=regional_time(3) ! day iadatemn(4)=regional_time(4) ! hour iadatemn(5)=regional_time(5) ! minute if(print_verbose)write (6,*) 'in gesinfo: iadatemn with minutes', iadatemn ! Handle NCEP global cases else ! Determine NCEP atmospheric guess file format intype = 0 if ( (.not. use_gfs_nemsio) .and. (.not. use_gfs_ncio) ) then call sigio_sropen(lunges,filename,iret) call sigio_srhead(lunges,sighead,iret2) if (iret/=0 .or. iret2/=0) then write(6,*)' GESINFO: UNKNOWN FORMAT FOR NCEP ATM GUESS FILE ',filename call stop2(99) stop endif if (mype==mype_out) & write(6,*)'GESINFO: Read NCEP sigio format file, ',filename ! Extract information from NCEP atmospheric guess using sigio ! Fill structure with NCEP sigio header information gfshead%fhour=sighead%fhour gfshead%idate=sighead%idate gfshead%latb=sighead%latb gfshead%lonb=sighead%lonb gfshead%levs=sighead%levs gfshead%jcap=sighead%jcap gfshead%ntrac=sighead%ntrac gfshead%idvc=sighead%idvc gfshead%idvm=sighead%idvm gfshead%idsl=sighead%idsl gfshead%ncldt=sighead%ncldt gfshead%nvcoord=sighead%nvcoord allocate(gfsheadv%vcoord(gfshead%levs+1,gfshead%nvcoord)) gfsheadv%vcoord=sighead%vcoord allocate(gfsheadv%cpi(gfshead%ntrac+1)) if (mod(gfshead%idvm/10,10) == 3) then do k=1,gfshead%ntrac+1 gfsheadv%cpi(k)=sighead%cpi(k) end do else do k=1,gfshead%ntrac+1 gfsheadv%cpi(k)=zero end do endif call sigio_sclose(lunges,iret) ! Check for consistency: jcap, levs if (gfshead%jcap/=jcap_b .or. gfshead%levs/=nsig) then write(6,*)'GESINFO: ***ERROR*** sigio (jcap_b,levs)=',& gfshead%jcap,gfshead%levs, ' do not equal ',& ' user (jcap_b,nsig)=',jcap_b,nsig call stop2(85) endif ! Extract information from NCEP atmospheric guess using NEMSIO else if ( use_gfs_nemsio ) then call nemsio_init(iret=iret2) if ( iret2 /= 0 ) then write(6,*)' GESINFO: ***ERROR*** problem nemsio_init file = ', & trim(filename),', Status = ',iret2 call stop2(99) end if call nemsio_open(gfile2,filename,'READ',iret=iret2) if ( iret2 /= 0 ) then write(6,*)' GESINFO: ***ERROR*** problem opening file = ', & trim(filename),', Status = ',iret2 call stop2(99) end if idate = i_missing nfhour = i_missing nfminute = i_missing nfsecondn = i_missing nfsecondd = i_missing gfshead%idsl = i_missing call nemsio_getfilehead(gfile2, idate=idate, gtype=filetype, & modelname=mdlname, nfhour=nfhour, nfminute=nfminute, & nfsecondn=nfsecondn, nfsecondd=nfsecondd, & dimx=gfshead%lonb, dimy=gfshead%latb, dimz=gfshead%levs, & jcap=gfshead%jcap, ntrac=gfshead%ntrac, idvc=gfshead%idvc, & idsl=gfshead%idsl, ncldt=gfshead%ncldt, iret=iret2) if ( iret2 /= 0 .or. TRIM(filetype) /= 'NEMSIO' ) then write(6,*)' GESINFO: UNKNOWN FORMAT FOR GFSATM file = ', & trim(filename),' Status = ',iret2 write(6,*)' GESINFO: reding filetype = ',trim(filetype), & ' modelname = ', trim(mdlname) call stop2(99) else if (mype==mype_out) write(6,*)'GESINFO: Read NCEP nemsio ', & 'format file, ',trim(filename), ' model name = ', trim(mdlname) endif ! Extract vertical coordinate descriptions nems_vcoord. ! nems_vcoord(gfshead%levs+1,3,2) dimension is hardwired here. ! Present NEMSIO modules do not allow flexibility of 2nd and 3rd ! array dimension for nems_vcoord, for now, it is hardwired as ! (levs,3,2) If NEMS changes the setting of vcoord dimension, ! GSI needs to update its setting of nems_vcoord accordingly. if (allocated(nems_vcoord)) deallocate(nems_vcoord) allocate(nems_vcoord(gfshead%levs+1,3,2)) call nemsio_getfilehead(gfile2,iret=iret2,vcoord=nems_vcoord) if ( iret2 /= 0 ) then write(6,*)' GESINFO: ***ERROR*** problem reading header ', & 'vcoord, Status = ',iret2 call stop2(99) endif ! Determine the type of vertical coordinate used by model because that ! gfshead%nvcoord is no longer part of NEMSIO header output. gfshead%nvcoord=3 if(maxval(nems_vcoord(:,3,1))==zero .and. & minval(nems_vcoord(:,3,1))==zero ) then gfshead%nvcoord=2 if(maxval(nems_vcoord(:,2,1))==zero .and. & minval(nems_vcoord(:,2,1))==zero ) then gfshead%nvcoord=1 end if end if if ( gfshead%idsl==i_missing .or. gfshead%idsl < 1 ) then gfshead%idsl=1 if ( gfshead%nvcoord == 3 ) gfshead%idsl=2 end if ! if (allocated(gfsheadv%vcoord)) deallocate(gfsheadv%vcoord) allocate(gfsheadv%vcoord(gfshead%levs+1,gfshead%nvcoord)) gfsheadv%vcoord(:,1:gfshead%nvcoord) = nems_vcoord(:,1:gfshead%nvcoord,1) ! ! obtain gfs%head time info from readin nemsio header info (w/ different ! definition and variables) if ( nfhour == i_missing .or. nfminute == i_missing .or. & nfsecondn == i_missing .or. nfsecondd == i_missing ) then write(6,*)'GESINFO: ***ERROR*** some forecast hour info are not ', & 'defined in ', trim(filename) write(6,*)' : nfhour, nfminute, nfsecondn, and nfsecondd = ', & nfhour, nfminute, nfsecondn, nfsecondd call stop2(99) endif gfshead%fhour = float(nfhour) + float(nfminute)/r60 + & float(nfsecondn)/float(nfsecondd)/r3600 gfshead%idate(1) = idate(4) !hour gfshead%idate(3) = idate(3) !day gfshead%idate(2) = idate(2) !month gfshead%idate(4) = idate(1) !year call nemsio_close(gfile2,iret=iret2) if ( iret2 /= 0 ) then write(6,*)'GESINFO: problem closing file = ',trim(filename),', Status = ',iret2 call stop2(99) end if ! Check for consistency: levs, latb,lonb ! if (gfshead%latb+2/=nlat .or. gfshead%lonb/=nlon .or. & ! gfshead%levs/=nsig ) then ! write(6,*)'GESINFO: ***ERROR*** gfshead (latb+2,lonb,levs)=',& ! gfshead%latb+2,gfshead%lonb,gfshead%levs, ' do not equal ',& ! ' user (nlat,nlon,nsig)=',nlat,nlon,nsig ! call stop2(99) ! endif else ! use_gfs_ncio and get this information write(sfilename,'("sfcf",i2.2)')nhr_assimilation ! open the netCDF file atmges = open_dataset(filename,errcode=iret) if (iret /=0) then write(6,*)'GESINFO: ***FATAL ERROR*** ',trim(filename),' NOT AVAILABLE: PROGRAM STOPS' call stop2(99) endif sfcges = open_dataset(sfilename,errcode=iret) if (iret /=0) then write(6,*)'GESINFO: ***FATAL ERROR*** ',trim(sfilename),' NOT AVAILABLE: PROGRAM STOPS' call stop2(99) endif ! get dimension sizes ncdim = get_dim(atmges, 'grid_xt'); gfshead%lonb = ncdim%len ncdim = get_dim(atmges, 'grid_yt'); gfshead%latb = ncdim%len ncdim = get_dim(atmges, 'pfull') ; gfshead%levs = ncdim%len ! hard code jcap,idsl,idvc gfshead%jcap = -9999 gfshead%idsl= 1 gfshead%idvc = 2 call read_attribute(atmges, 'ncnsto', ntrac) gfshead%ntrac = ntrac(1) call read_attribute(sfcges, 'ncld', ncld) gfshead%ncldt = ncld(1) call close_dataset(sfcges) if (mype==mype_out) write(6,*)'GESINFO: Read NCEP FV3GFS netCDF ', & 'format file, ',trim(filename) ! hard code nvcoord to be 2 gfshead%nvcoord=2 ! ak and bk if (allocated(gfsheadv%vcoord)) deallocate(gfsheadv%vcoord) allocate(gfsheadv%vcoord(gfshead%levs+1,gfshead%nvcoord)) call read_attribute(atmges, 'ak', aknc) call read_attribute(atmges, 'bk', bknc) do k=1,gfshead%levs+1 kr = gfshead%levs+2-k gfsheadv%vcoord(k,1) = aknc(kr) gfsheadv%vcoord(k,2) = bknc(kr) end do deallocate(aknc,bknc) ! get time information idate2 = get_idate_from_time_units(atmges) gfshead%idate(1) = idate2(4) !hour gfshead%idate(2) = idate2(2) !month gfshead%idate(3) = idate2(3) !day gfshead%idate(4) = idate2(1) !year call read_vardata(atmges, 'time', fhour) ! might need to change this to attribute later ! depends on model changes from Jeff Whitaker gfshead%fhour = fhour(1) call close_dataset(atmges) endif ! Extract header information hourg = gfshead%fhour idate4(1)= gfshead%idate(1) idate4(2)= gfshead%idate(2) idate4(3)= gfshead%idate(3) idate4(4)= gfshead%idate(4) idate4(5)= zero ntracer = gfshead%ntrac ncloud = gfshead%ncldt ! Load vertical coordinate structure idvc5=gfshead%idvc idsl5=gfshead%idsl do k=1,nsig+1 ak5(k)=zero bk5(k)=zero ck5(k)=zero end do if (gfshead%nvcoord == 1) then do k=1,nsig+1 bk5(k) = gfsheadv%vcoord(k,1) end do elseif (gfshead%nvcoord == 2) then do k = 1,nsig+1 ak5(k) = gfsheadv%vcoord(k,1)*zero_001 bk5(k) = gfsheadv%vcoord(k,2) end do elseif (gfshead%nvcoord == 3) then do k = 1,nsig+1 ak5(k) = gfsheadv%vcoord(k,1)*zero_001 bk5(k) = gfsheadv%vcoord(k,2) ck5(k) = gfsheadv%vcoord(k,3)*zero_001 end do else write(6,*)'GESINFO: ***ERROR*** INVALID value for nvcoord=',gfshead%nvcoord call stop2(85) endif ! Load reference temperature array (used by general coordinate) do k=1,nsig tref5(k)=h300 end do if ( (.not. use_gfs_nemsio) .and. (.not. use_gfs_ncio) ) then ! Load surface pressure and thermodynamic variable ids idvm5 = gfshead%idvm idpsfc5 = mod ( gfshead%idvm,10 ) idthrm5 = mod ( gfshead%idvm/10,10 ) ! Load specific heat for tracers if (allocated(cp5)) deallocate(cp5) allocate(cp5(gfshead%ntrac+1)) do k=1,gfshead%ntrac+1 cp5(k)=gfsheadv%cpi(k) end do end if ! Check for consistency with namelist settings if (gfshead%jcap/=jcap_b.and..not.regional .or. gfshead%levs/=nsig) then if (gfshead%levs/=nsig) then write(6,*)'GESINFO: ***FATAL ERROR*** guess levels inconsistent with namelist' write(6,*)' guess nsig=',gfshead%levs write(6,*)' namelist nsig=',nsig fatal = .true. endif if (gfshead%jcap/=jcap_b.and..not.regional ) then if (gfshead%jcap < 0) then ! FV3GFS write component does not write JCAP to the NEMSIO file if ( mype == mype_out ) then write(6,*)'GESINFO: ***WARNING*** guess jcap inconsistent with namelist' write(6,*)'GESINFO: ***WARNING*** this is a FV3GFS NEMSIO/NetCDF file' endif fatal = .false. else if ( mype == mype_out ) & write(6,*)'GESINFO: ***FATAL ERROR*** guess jcap inconsistent with namelist' fatal = .true. endif if ( mype == mype_out ) & write(6,*)'GESINFO: guess jcap_b, namelist jcap_b = ',gfshead%jcap, jcap_b endif if ( fatal ) call stop2(85) endif ! Echo select header information to stdout if(mype==mype_out .and. print_verbose) then if ( (.not. use_gfs_nemsio) .and. (.not. use_gfs_ncio) ) then write(6,100) gfshead%jcap,gfshead%levs,gfshead%latb,gfshead%lonb,& gfshead%ntrac,gfshead%ncldt,idvc5,gfshead%nvcoord,& idvm5,idsl5,idpsfc5,idthrm5 100 format('GESINFO: jcap_b=',i4,', levs=',i3,', latb=',i5,& ', lonb=',i5,', ntrac=',i3,', ncldt=',i3,', idvc=',i3,& ', nvcoord=',i3,', idvm=',i3,', idsl=',i3,', idpsfc=',i3,& ', idthrm=',i3) else write(6,200) gfshead%jcap,gfshead%levs,gfshead%latb,gfshead%lonb,& gfshead%ntrac,gfshead%ncldt,idvc5,gfshead%nvcoord,idsl5 200 format('GESINFO: jcap_b=',i5,', levs=',i3,', latb=',i5,& ', lonb=',i5,', ntrac=',i3,', ncldt=',i3,', idvc=',i3,& ', nvcoord=',i3,', idsl=',i3) end if do k=1,nsig write(6,110) k,ak5(k),bk5(k),ck5(k),tref5(k) end do k=nsig+1 write(6,110) k,ak5(k),bk5(k),ck5(k) 110 format(3x,'k,ak,bk,ck,tref=',i3,1x,4(g19.12,1x)) endif ! End of NCEP global block endif end select ! Compute grid latitude, longitude, factors, and weights. call gengrid_vars ! Compute analysis time from guess date and forecast length. iyr=idate4(4) ihourg=hourg if(iyr>=0.and.iyr<=99) then if(iyr>51) then iyr=iyr+1900 else iyr=iyr+2000 end if end if fha=zero; ida=0; jda=0 fha(2)=ihourg ! relative time interval in hours #ifdef RR_CLOUDANALYSIS fha(3)=minuteg ! relative time interval in minutes #endif ida(1)=iyr ! year ida(2)=idate4(2) ! month ida(3)=idate4(3) ! day ida(4)=0 ! time zone ida(5)=idate4(1) ! hour #ifdef RR_CLOUDANALYSIS ida(6)=idate4(5) ! minute #endif call w3movdat(fha,ida,jda) iadate(1)=jda(1) ! year iadate(2)=jda(2) ! mon iadate(3)=jda(3) ! day iadate(4)=jda(5) ! hour #ifdef RR_CLOUDANALYSIS iadate(5)=jda(6) !regional_time(5) ! minute #else iadate(5)=0 ! minute #endif ianldate =jda(1)*1000000+jda(2)*10000+jda(3)*100+jda(5) ! Determine date and time at start of assimilation window ida(:)=0 jda(:)=0 fha(:)=zero fha(2)=-float(int(min_offset/60)) fha(3)=-(min_offset+fha(2)*r60) ida(1:3)=iadate(1:3) ida(5:6)=iadate(4:5) call w3movdat(fha,ida,jda) ibdate(1:5)=(/jda(1),jda(2),jda(3),jda(5),jda(6)/) iadatebgn=jda(1)*1000000+jda(2)*10000+jda(3)*100+jda(5) ! Set the analysis time - this is output info... ! w3fs21(NCEP-w3) converts analysis time to minutes relative to a fixed date. call w3fs21(ibdate,nmin_an) iwinbgn = nmin_an ! Determine date and time at end of assimilation window ida(:)=jda(:) jda(:)=0 fha(:)=zero if ( min_offset == 0 ) then fha(2)=zero else fha(2)=nhr_assimilation endif call w3movdat(fha,ida,jda) iedate(1:5)=(/jda(1),jda(2),jda(3),jda(5),jda(6)/) iadateend=jda(1)*1000000+jda(2)*10000+jda(3)*100+jda(5) ! Get time offset call time_4dvar(ianldate,time_offset) #ifdef RR_CLOUDANALYSIS fha(2)=float(int(min_offset/60)) fha(3)=(min_offset-fha(2)*r60) time_offset=time_offset+fha(3)/r60 #endif ! Get information about date/time and number of guess files select case (trim(center)) case('CPTEC') call read_bamfiles(mype) case default if (regional) then if(wrf_nmm_regional) then call wrf_nmm_files%read_wrf_nmm_files(mype) else if(nems_nmmb_regional) then call wrf_nmm_files%read_nems_nmmb_files(mype) else if(wrf_mass_regional) then call wrf_mass_files%read_wrf_mass_files(mype) else if(fv3_regional) then call read_fv3_files(mype) else if(twodvar_regional) then call read_2d_files(mype) else if(cmaq_regional) then call read_cmaq_files(mype) end if else call read_files(mype) endif end select if(mype==mype_out) then if (twodvar_regional) then write(6,*)'GESINFO: 2dvar-Guess-date is',regional_time write(6,*)'GESINFO: Analysis date with minute: ',iadatemn else write(6,*)'GESINFO: Guess date is ',idate4,hourg write(6,*)'GESINFO: Analysis date is ',iadate,ianldate,time_offset endif endif if (allocated(nems_vcoord)) deallocate(nems_vcoord) if (allocated(gfsheadv%vcoord)) deallocate(gfsheadv%vcoord) if (allocated(gfsheadv%cpi)) deallocate(gfsheadv%cpi) if (allocated(cp5)) deallocate(cp5) return end subroutine gesinfo